|
BOTO-BQS/BQG系列清洗機中英文對照產品說明
專利號：200930044807.5 （BOTO 博太創展專利）
請用戶在操作清洗機前詳細閱讀本說明書，按照說明的使用方法操作，
否則可能會給本清洗機造成損害或危及您或他人的人身、財產安全。
本清洗機需由技術人員安裝及維護，用戶切勿自行安裝及維護或擅拆卸
及改裝清洗機部件。
敬告用戶 Use Guide
Please read the instructions before using the cleaner, otherwise, may damage
the cleaner and endanger you and other people's life and wealth.
This cleaner should be installed and maintained by technical staff, the user
do not install and maintain or disassembly and changes the cleaner by
yourself. Operates the cleaner according to the use instruction.
一、清洗機清洗系統結構
Washing system structure of cleaner
二、設備型號：BOTO –BQG-812 Equipment Model：BOTO –BQG-812
三、設備示意圖
Equipment diagram
Stop and emergency stop
四、停止及緊急停止
五、主要特點
main characteristics
六、機器主要參數
the main parameters of the machine
Working Principle
七、工作原理
八、結構組成
Consisting structure:
九、操作使用
Operation and use
十、使用前檢查
Check before use
Put the steel net/ circuit board
十一、放置鋼網/電路板
十二、清潔及維護
Clean and maintain
十三、維護保養項目
Maintenance item
十四、常見故障排除
Common Failure recovery
十五、主要部件
Main parts
十六、裝箱單
Packing List
十七、維修記錄
Maintain record
一. 清洗機清洗系統結構
Washing system structure of cleaner
BOTO-BQS/BQG系列清洗機采用國際高新技術，采用全氣動工作原理，不用電源，采用所有進口
氣動組件，國際高新技術支持，工作時無死點。
全氣動自動網清洗機系統采用優質進口氣動噴淋泵等組成。氣動噴淋泵，是一種新型噴淋機械，是目前
最新穎的一種泵類。采用壓縮空氣為動力源，對于各種腐蝕性液體，帶顆粒的液體，高粘度、易揮發、
易燃、劇毒的液體，均能予以抽光吸盡。
噴淋泵根據不同液體介質采用聚四氟乙烯以滿足不同使用者的需要。安置在各種特殊場合，用
來抽送各種常規泵不能抽吸的介質，均取得了滿意的效果。
BOTO-BQS/BQG Series of washing machine is in international high-tech. It uses entire pneumatic working
principle instead of power supply. It consists of all imported pneumatic components with international
high-tech. There is no dead point in operation.
Steel mesh cleaner consists of high-quality imported pneumatic spray pump and so on. Pneumatic
spray pump is a new type of spray machinery and is the most innovative pump. The compressed air
is used as a power source and capable of absorbing all kinds of liquid which is corrosive, particles
containing, of high viscosity, volatile, flammable, poisonous and so on.
Spray pump uses PTFE according to various medium of liquid so as to meet the requirements of
various users. It can be installed in a variety of special occasions to transit the medium which
conventional pump can not absorb. It has obtained a satisfactory effect.
三、設備示意圖Equipment diagram
概要Overview
本清洗設備從清洗到干燥過程，利用氣壓全自動運行的高性能氣動型全自動清洗設備，不但能
滿足 METAL MASK的清洗，還能滿足 PCB、絲印網版及各種被清洗物的自動清洗，設備設計合理，外觀精美，
完全氣壓控制，安全可靠，符合 VOC和ISO14000的環保型設備。
From the whole process of washing to drying, the cleaner uses the automatic pneumatic
washing equipment in high-performance and it runs by air pressure automatically. It can wash
not only METAL MASK but also PCB and all kinds of cleaning materials automatically. The
equipment is capable of rational design and exquisite appearance. It is controlled by air
pressure with safety. It is environmentally friendly equipment which complies with VOC
and ISO14000.
四、停止及緊急停止Stop and emergency stop
◆系統運行過程中，按下“停止”按鈕，系統停止運行。
◆緊急情況下，按下紅色“緊急停止”按鈕，系統自動停止并會卸壓防止發生事故。
◆“緊急停止”按鈕按下去后，如要恢復旋轉其即可。
◆In system operation process, press “Stop” button, the system will stop automatically.
◆In emergency case, press red “Emergency stop” button, the system will stop automatically and
decompress to avoid accident.
◆After press “Emergency stop” button, if want to recover, turn it.
五、主要特點main characteristics
1) 完全的氣動型設備,徹底排除了火災隱患及電力的消耗。
2) 與現有超聲波方式比,本設備更具永久性使用的優勢。
3) 一個按鈕就能全自動實現清洗到干燥全過程。
4) 少量清洗液能滿足清洗工作，內置過濾裝置，能 回流重復使用清洗液，清洗成本最小化。
5) 符合VOC和 ISO 14000。
6) 能清洗PCB及各種尺寸 ( SIZE)的絲印網版以及其它范本(MASK) 。
7）完全封閉的設計，減少氣體外泄,徹底改善工作環境。
1) Complete pneumatic equipment rules out the potential fire danger and electricity consumption.
2) Compared to the existing ultrasound, this equipment has a more prominent advantage of
permanent use.
3) It can automatically finish the whole process from washing to drying by a button.
4) It can do a good job with a small amount of cleaning liquid. It is equipped with filter inside
to reuse cleaning liquid by circumfluence so as to minimize the cleaning costs.
5) Comply with VOC and ISO14000.
6) It can wash PCB and the template(MASK) in different sizes.
7) It is designed to be totally enclosed to reduce gas leakage and improve the working
environment radically.
六、機器主要參數the main parameters of the machine
外形尺寸：長1100mmX寬1100mmX高1825mm
供氣：1mpa-8mpa/cm
耗氣量：400-700L/min
清洗時間：3-5F分鐘
吹干時間：3-5F分鐘
過濾方式：四重過濾
最大鋼網尺寸：736mmx736mmx40mm(MAX)
洗滌液再生裝置40L/min (自帶)
Overall Dimensions：1100mm(Length)X 1100mm(Width)X1825mm(Height)
Air supply：1mpa-8mpa/cm2
Air Consumption：400-700L/min
Washing time: 3-5 minutes
Dying time: 3-5 minutes
Filtration: quadruple filter
The maximum size of steel mesh：812mmx812mmx40mm(MAX)
The regenerated device of cleaning liquid 40L/min (self provided)
七、工作原理Working Principle
清洗機采用國際高新技術,采用全氣動工作原理,不用電源,采用所有進口氣動組件,國際高新技術
支持，工作時無死點。Cleaner adopts international high tech and entire pneumatic working principle instead of power
supply. It consists of all imported pneumatic components with international high-tech. There is
no dead point in operation.
工作原理圖 Working Principle diagram:
八、結構組成 Consisting structure:
1 設備外箱體
2 氣動控制面板
3 氣動控制系統
4 工作清洗腔
5 噴淋泵
6 清洗液貯液槽
1. The outer box of equipment
2. Pneumatic control panel
3. Pneumatic control system
4. Cleaning cavity
5. Spraying pump
6. Storage tank of cleaning liquid
7.1 外觀
外觀精美，操作方便.外殼采用SUS304 T=1.5mm 不銹鋼板制作，由上下兩部分組成，上部為清洗工作
腔及操作面板，下部為儲液箱，氣動噴淋泵及過濾系統.
7.2噴淋清洗
噴淋清洗槽采用進口SUS304不銹鋼鋼板制作，內設兩條旋轉噴淋管，高壓清洗液通過噴嘴按一定速度
的旋轉方式，噴射在清洗物(METAL MASK,PCB,SQUEEGEE HOLDER)表面，徹底清除表面及死角部分
的異物，為了提高清洗效率，還噴射高壓空氣，吹走未清洗的異物，最后再噴清洗液潤洗的方式。
7.3 儲液箱
儲液箱具有儲藏、過濾、回收之功能。設有進水口、排液口、過濾網框、液位顯示裝置；槽體使用進口
SUS304 T=2mm 的不銹鋼板制作。
7.4 噴淋泵
選用英格索蘭“QBY”氣動噴淋泵，最大流量133L/min,最大壓力8.0mpa/cm2，為噴淋清洗提供可靠的
保障.
1、壓縮空氣為動力。
2、是一種由膜片往復變形造成容積變化的容積泵，其工作原理近似于柱塞泵，由于噴淋泵工作原理的特點，
噴淋泵具有以下特點:
（1）泵不會過熱：壓縮空氣作動力，在排氣時是一個膨脹吸熱的過程，氣動泵工作時溫度是降低的，無有
害氣體排出。
（2）不會產生電火花：氣動噴淋泵不用電力作動力，接地后又防止了靜電火花。
（3）可以通過含顆粒液體：因為容積式工作且進口為球閥，所以不容易被堵。
（4）對物料的剪切力極低：工作時是怎么吸進怎么吐出，所以對物料的攪動最小，適用于不穩定物質的輸送。
（5）流量可調節，可以在物料出口處加裝節流閥來調節流量。
（6）具有自吸的功能。
（7）可以空運行，而不具有危險，保證清洗正常工作。
（8）可以潛水工作。
（9）可以輸送的流體極為廣泛，從低粘度的到高粘度的， 從腐蝕性得到粘稠的。
（10）沒有復雜的控制系統，沒有電纜、保險絲等。
（11）體積小、重量輕，便于移動。
（12）無需潤滑所以維修簡便，不會由于滴漏污染工作環境。
（13）泵始終能保持高效，不會因為磨損而降低。
（14）百分之百的能量利用，當關閉出口，泵自動停機，設備移動、磨損、超載、發熱。
（15）無需動密封，維修簡便避免了泄漏，工作時無死點，保證清洗正常工作。
7.5 過濾
采用四重過濾。高精密不銹鋼過濾裝置，濾心過濾最小為5微米。清洗液回流后經過環氧樹脂特
殊處理，可循環重復利用。成本損耗降到最少.
7.6 氣動控制
所有氣動組件采用 RS及亞德客 產品，一鍵式操作,設有 RS氣源指示器及門開啟指示器。
7.1 Appearance
It has a exquisite appearance and can be operated conveniently. Its shell is made from SUS304
T=1.5mm stainless steel plate consisting of upper section and lower section. The cleaning cavity
and operating panel are on the upper section; while the liquid storage tank, pneumatic spray pump
and filter system are on the lower section.
7.2 The washing of spray
The spray cleaning tank is made from imported SUS304 stainless steel plate with two rotating spray
pipes inside. High-pressure cleaning liquid is sprayed on the surface of cleaning material (METAL
MASK,PCB,SQUEEGEE HOLDER) through nozzle at a certain rotating speed. The cleaning liquid
can completely remove the foreign body on the surface or corner. In order to rise cleaning efficiency,
cleaning liquid and high-pressure are sprayed at the same time to remove the foreign bodies. In the
end it sprays cleaning liquid for lubrication.
7.3 Liquid storage tank
Liquid storage tank has the function of storage, filtration and recovery. It is equipped with water inlet,
liquid outlet, and filter net, liquid level device; the tank body is made from imported SUS304 T=2mm
stainless steel plate.
7.4 Spray pump
It uses the Ingersoll-Rand “QBY” pneumatic spray pump. The maximum flow is 133L/min and
maximum pressure is 8.0mpa/cm2, provides the reliable guarantee for washing spray.
1. Compressed air is used as driving force.
2. It is a displacement pump whose volume change is caused by the reciprocating deformation of
diaphragm. Its working principle is similar to piston pump's. Spray pump has following characteristics
according to its working principle:
(1) Pump will not overheat: powered by compressed air, it bulges and absorbs heat in the process
of exhausting. When the pneumatic pump is running, the temperature is lowered and there is no
emission of harmful gas.
(2) It will not product electric spark: pneumatic diaphragm pump is not powered by electricity, it can
prevent from static spark in grounding.
(3) The liquid with particles can be passed by: because it works in the volume and its inlet is ball valve,
it is hard to block.
(4) It has a low shearing force to materials: the absorbing method is the same as discharging, so it
has low stirring to materials. It is applicable for the delivery of unstable substances.
(5) Its flow rate can be adjusted. The throttle valve can be installed at the exit of materials to adjust
flow rate.
(6) It is capable of self absorption.
(7) It can run empty with no danger to ensure the normal work of cleaning.
(8) It can run in the diving operation.
(9) It can deliver a wide range of liquid, from low viscosity to high viscosity, from corrosive to viscous.
(10) It has no complex control systems, cables or fuses.
(11) It has small size and light weight for the convenience of moving.
(12) It is convenient to repair without lubrication. So there is no lubrication leakage to pollute the
working environment.
(13) The pump can always keep high efficiency. The wear will not lower the efficiency.
(14)100% of energy use. When the exit is closed, pump will stop automatically. Equipment movement,
wear, overloading and overheat.
(15) There is no need to move the sealing when repairing, so it can avoid leakage. There is no dead
point in running. It can ensure the normal work of washing.
7.5 Filtration
It uses quadruple filtration. It is equipped with high-tech filter. The minimum filter heart is 5 microns. After
the circumfluence, cleaning liquid will have a special treatment by epoxy resin for the recovery and utility.
It can minimize the consumption cost.
7.6 Pneumatic control
All pneumatic components are made from and . One-touch operation includes
gas indicating lamp and start indicating lamp.
九、操作使用Operation and use
該清洗機清洗過程全自動控制，操作者打開機器門，將鋼網放置在機器內的工件放置架上，關
上機器門，按壓操作面板上的啟動按鈕，機器會自動進行高壓噴淋清洗，噴淋清洗完后，會自動進
行高壓空氣吹干過程，當吹干時間到達后，機器恢復備用狀態.操作者可打開機器門取出工件。再進
行下次清洗過程。操作簡易。
The washing process of washing machine is controlled automatically by itself. Operator open
the door of machine, put the steel mesh on the work piece shelf in the machine, close the door,
press the button on the operation panel, then the machine will do the job of spray washing auto
matically in high pressure. After washing, the machine will automatically switch in the process
of high pressure air drying. After reaching the dry time, the machine will restore to the standby
condition. At that time operator can open the door of machine and take out work pieces for the
next washing. The operation is very simple.
十一、放置鋼網/電路板Put the steel net/ circuit board
鋼網/電路板絲印網版不超過32英寸；
◆如果鋼網/網版上有殘留大面積的錫膏/油墨，則需先用小刮刀將錫膏/油墨盡量刮干凈，然后再放入。
◆打開外門內門，擰松旋緊螺釘，調整夾緊塊的高度到恰當位置后再擰緊，放入鋼網/電路板/絲印網版
關上內外門。
The size of steel net/ circuit board is not more than 32″
◆If have lots of tin cream remain on steel net, please first clean the tin cream with small scraper, then put.
◆Open the outside and inside door, slacken the tightening screw, adjust the height of clamp block to the relevance
point, and put the steel net/ circuit board Close the inside and outside door
十二、清潔及維護Clean and maintain
◆ 設置控制面板上的清洗定時器時間為3-5 分鐘。
◆ 設置風干定時器時間為3-5分鐘。
◆ 按下“啟動”按鈕，系統開始運作。
◆ 此時清洗指示燈亮，完成清洗模式后自動轉入吹干模式，吹干指示燈亮；系統工作狀態中，前門
鎖住，不能打開。
◆ 調節噴淋泵上的調節閥，使溶劑噴射壓力顯示在1bar 左右。（第一次使用）
◆ 設定時間到后，系統自動停止。
◆ 如鋼網或者絲印網版放置時間過長，助焊劑和油墨發揮過強，可適當延長清洗時間。
Cleaning and air drying mode
◆ The setting time on cleaning timer on control panel is 3-5 minutes
◆ The setting time on air drying timer is 3-5 minutes
◆ Press “Start” button, the system starts working
◆ At this time, the cleaning indicator is light, completed the cleaning mode and automatically to the air
drying mode, and the air drying indicator is lighting, and the system is in working, the front door has
been locked, can't open
◆ Adjusts the adjustable valve on spraying pump, the display of jet pressure of solvent is about 1bar.
After the setting time (first time use),
◆ the system will stop automatically.
◆ If the used steel net is placed for a long term, the soft solder is over fly off, the adhesive of tin cream
is too strong, can delay the cleaning time
純清洗模式
◆ 設置控制面板上的清洗定時器時間為3-5分鐘。
◆ 設置風干定時器時間為0 分鐘。
◆ 按下“啟動”按鈕，系統開始運作。
◆ 此時清洗指示燈亮；系統工作狀態中，前門鎖住，不能打開。
◆ 設定時間到后，系統自動停止。
Pure cleaning mode
◆ The setting time on cleaning timer on control panel is 3-5 minutes
◆ The setting time of air drying timer is 0 minutes
◆ Press “Start” button, the system starts working
◆ At this time, the cleaning indicator is light, and the system is in working, the front door has been locked,
can't open
◆ After the setting time, the system stops automatically
純風干模式
◆ 設置控制面板上的清洗定時器時間為0 分鐘。
◆ 設置風干定時器時間為3-5 分鐘。
◆ 按下“啟動”按鈕，系統開始運作。
◆ 此時風干指示燈亮；系統工作狀態中，前門鎖住，不能打開。
◆ 設定時間到后，系統自動停止。
Pure air drying mode
◆ The setting time on cleaning timer on the control panel is 0 minute
◆ The setting time on air drying timer is 3-5minutes
◆ Press “Start” button, the system starts working
◆ The air dying indicator is light; the system is in working, the front door has been locked, can't open.
◆ After the setting time, the system stops automatically
有關使用方面的說明
◆清洗機需要定期清潔，特別是要除去長期使用積聚在儲液槽里面的雜質。為不影響清洗效果，
建議每2 個月完全更換溶劑及清理沉積的雜質。
更換方法：
◆將溶劑抽出閥門打開，關閉溶劑噴射閥門，膠管對準廢液回收桶。
◆設定清洗時間為5 分鐘，風干時間為0，按“啟動”按鈕。抽完后，按“停止”按鈕。
◆清除儲液槽里的雜質。
！注意：在排廢液時，噴射壓力較大，防止廢液濺出，而傷到眼睛。建議使用防護眼罩。
◆ 更換過濾棉、濾紙、活性炭、還原樹脂
更換方法：見安裝手冊
◆工作腔清潔保養，取出鋼網架進行清潔。清潔清洗腔內部。用小刮刀將沉淀的錫膏粉清
除。完成后，重新安裝鋼網架。
更換方法：如下圖
Instruction for relation use
◆The cleaner should be cleaned at fixed period, and specialty removes the long term use tin cream and
accumulated in liquid storage tank. In order to not affect the washing, advice to completely replace the
solvent and clean the settled tin cream every 2 months.
Replacement methods:
◆Open the solvent extract valve, close the jet valve of solvent, the glue tube aim to the waste liquid
recovery barrel
◆The setting clean time is 5 minutes, the air drying time is 0, press “Start” button, after exhausted,
press “Stop” button.
◆Clean the tin cream in liquid storage tank
Note: When discharge the waste liquid, the jet pressure is too higher, for avoid waste liquid hurts the eye,
advice use the protective eye-mask
◆Replace the filter cotton, filter paper, activated carbon and reduction resin
Replacement method: Refers to installation manual
◆Clean and maintain the working space, takes out the steel net and clean. Clean the inside of clean cavity.
Clean the settled tin cream power with small scraper
Replacement method: as following drawing
旋轉噴管的清理,先拆下來,用噴氣qiang對準噴嘴噴氣，使堵塞的噴嘴暢通。
◆ 拆卸安裝方法：如下圖，
Clean the turning nozzle, first disassembly it, and air blast aim to the nozzle with
air blast gun, the blocked nozzle keeps pass out
◆ The disassembly and mounting methods: as the following drawing
長期不使用清洗機前，應該做好如下措施：
◆ 清洗工作腔。
◆ 處理完儲液槽里的溶劑并清理干凈。
◆ 拿出過濾罐里面的過濾棉，同時清理干凈。
◆ 關閉進氣源。
If your don't use the cleaner for a long term, please carry out the following measures
◆ Clean working space
◆ Clean after treated the solvent in liquid storage tank
◆ Take out filtering cotton in filter tank and clean
◆ Close the air intake source
|
